HOW TO USE• Make sure the surface is clean and full decontaminated. Use CARPRO IronX, TarX, and clay the surface to ensure all contamination is removed. • Use CARPRO Eraser (or similar) to remove oils before application. Make sure the surface is cool and dry. You may wish to polish the surface with Essence or Reflect to create higher gloss before using Eraser or to ensure maximum durability. •. Apply 10-12 drops on a microfiber applicator; apply the product evenly to one small area of roughly 24x24” (60x60cm) with complete coverage and an even layer. • Use a high quality microfiber to remove any excess. CQUARTZ Lite does not need to be left to cure on the surface so should be removed immediately. Check well with an appropriate light source to ensure you remove any high spots or residues. NOTE: for a limited time after application, high spots that were not removed immediately can be corrected by applying more CQUARTZ Lite on that area and wiping off immediately. • After the surface is even free of residue, leave to dry for 4 hours prior to getting wet. Any water drops during the first 48h must be removed before drying to prevent water spotting. We also recommend using CARPRO Reload shampoo 1 hour after application to protect from water spots during the first 48h. Recommended personal protection equipment: Face mask and nitrile gloves suitable for protection from solvents while applying."
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.